SPD USB Driver is a tiny Windows program that detects and connects any Spreadtrum-powered Android phone to a computer. It primarily serves as a bridge between the PC and the phone, allowing you to flash, update, upgrade, and transfer personal files.
SPD Tool will not be able to recognize your phone unless you install the necessary SPD USB driver on your PC and Qualcomm Flash Tool. Here, I’ll show you the best two installation methods: Direct & Manual. So, follow the full article carefully.
Note: All versions of Microsoft Windows 7, Windows 8, and Windows 10 are supported by these drivers (32 & 64bit).
What is SPD USB Driver?
When it comes to connecting your SPD-powered phones to a Windows PC, the Spreadturm USB Driver is critical. Because most prominent phone maker brands now use SPD chipsets, installing the SPD USB Driver is required. It will establish a secure and reliable connection between your computer and your phone. It can assist you in transferring files or flashing your phone using a computer running Windows.
It becomes simpler to flash stock firmware files or any other custom files using ADB & Fastboot Tools like Samsung Odin Tool, LGUP Tool, Nokia OST Tool, AFT Tool, Vivo ADB Tool, SP Flash Tool after you install the Spreadturm USB Driver on your PC.
Supported Software tools for This Drivers
- SPD FRP Tool
- Android Multi-Tool
- Spreadtrum PC suite
- SPD Flash Tool
- Miracle Box Tool
- Volcano Box
- MCT SPD Tool
- CM2 SPD Box Tool
- MRT SPD Tool
- Medusa Box
- Piranha Box
- Android SPD Tool
- Infinity-Box
- Falcon Box
- FRP Bypass Tool
Download SpreadTurm USB Driver (SPD)
Here’s where you can get the best SPD USB Driver download link. The drivers are fully functional and virus-free, and they may be installed using either the Installer or the manual approach.
- Only works with SPD-enabled Android and feature phones.
- ADB drivers must be installed on your PC.
- A decent USB cord was required.
Turn off ‘Driver Signature Verification‘ on your PC if you’re using Windows 8 or later. take the following steps:
1. On your computer, open Command Prompt (CMD). In the CMD window, copy and paste the following code:
bcdedit /set testsigning on
2. Reboot your sytem to enter Test Mode.
3. Enter the following code to exit the Test mode:
bcdedit /set testsigning off
Download SpreadTurm USB Driver for Windows 11/10/8/7 32bit click here.
Download SpreadTurm USB Driver for Windows 11/10/8/7 64bit click here.
How to Install SPD USB Driver on Windows 11/10/8/7
We’ll show you how to install SPD Android USB Drivers on any Windows 32-bit or 64-bit PC in this article. The first thing we’ll go over is how to use the setup wizard to perform an automatic installation. Installing SPD Drivers on a Windows PC in this manner is the safest method.
Method 1. Automatic Installation
1. Download and extract the Spreadturm drivers based on your PC’s operating system architecture (32-bit or 64-bit).
2. Run the SPD_driver.exe
3. Click Next > Next on the Installation Wizard Setup.
4. Click on I Accept the terms in the license agreement option to accept the Terms in the license agreement.
5. Press on Next –> Install the Spreadturm USB driver on your computer automatically.
In this video, we are gonna show you how to setup SPD SCI Spreadtrum USB Drivers in Windows 10:
Method 2. Manually Install SPD Android USB Driver on Windows
If the automatic installation method above does not work for you, you can install the SPD Android USB driver manually. Here’s how to do it step by step:
1. Navigate to Control Panel > Device Manager.
2. Tap on Action > Add legacy hardware.
3. A new popup will appear, click on Next.
4. Choose the “Install the hardware that I have manually select from a list (Advanced)” and click Next.
5. Choose “Show All Devices” and then, tap on Next.
6. Select Browse and enter the path to the SPD.inf manually installed driver package folder.
7. Click OK.
8. You’ll be taken back to the Add Hardware dialog once more.
9. Click Next once more and wait a few seconds.
That is all there is to it.
How to Update SPD USB Driver
If you want to update your driver to a newer version, carefully follow the steps outlined below. You can also utilize this step if the previous two steps aren’t working on your computer.
1. Go to Control Panel > Device Manager.
2. Under the device manager, you’ll find “SciU2S.”
3. Select “Search Automatically Updated Driver Software” from the right-click menu on “SciU2S.”
4. Windows will locate the appropriate USB driver for your device.
5. Wait for the conclusion.
6. When the driver installation is complete, your device will appear in the device manager as Spreadturm USB Drivers.
In this post, I’ll show you how to install and get the latest SPD Android USB Drivers for Windows 7/8/10. I hope I’ve addressed all of your concerns about the USB Driver Error.
If you’re still having trouble with any of the processes or don’t understand something about this issue, please let me know in the comments box below. Thank you for stopping by.