Reboot and Select Proper Boot Device Issue [SOLVED]

Reboot and Select Proper Boot Device Issue [SOLVED]: Corrupted system files, an erroneous boot order, or a hard disk failure can all produce this error. These are only a few of the most typical reasons of this problem in Windows. This error appears when you start Windows, and even if you restart your computer, you will be unable to boot because you will be presented with a black screen with the following error message:

Restart the computer and select the appropriate boot device.
Alternatively, place the boot media in the selected boot device and hit a key.

Even replacing the malfunctioning hard disk doesn’t always appear to solve the problem, but don’t worry; here at troubleshooter, we’ve listed a few alternative remedies to assist you to troubleshoot this problem quickly.

Contents

Reboot and Select Proper Boot Device Issue [SOLVED]

Method 1: Set Correct Boot Order

The error “Reboot and Select proper Boot device” may appear because the boot order is incorrectly established, which means the machine is attempting to boot from a source that does not contain an operating system and failing. To resolve this problem, establish the Hard Disk as the first priority in the Boot order. Let’s look at how to set the correct boot order:

1. To enter BIOS setup, repeatedly press the Delete or F1 or F2 key (depending on your computer’s manufacturer) when your computer starts (before the boot screen or the error screen).

2. Select Boot tab from the list of options once you’re in BIOS setup.

3. Now, in the Boot order, make sure that the computer’s Hard disk or SSD is set as the first priority. If not, use the up and down arrow keys to move the hard disk to the top of the list, indicating that the computer will boot from it first, rather than any other source.

4. Lastly, hit F10 to save and leave your changes. If this does not resolve the Fix Reboot and Select Proper Boot Device Issue, proceed. ee

Method 2: Check if the Hard Disk is damaged/failed

If the previous methods were ineffective, your hard disk could be damaged or corrupted. In any event, you’ll need to install Windows again after replacing your old HDD or SSD. However, before jumping to any conclusions, use a diagnostic program to see if you actually need to replace your HDD/SSD.

To start Diagnostics, restart your computer and hit the F12 key as soon as the computer boots up (before the boot screen shows). When the Boot menu appears, highlight the Boot to Utility Partition option or the Diagnostics option and press enter to begin Diagnostics. This will automatically check all of your system’s hardware and notify you if any problems are discovered.

Method 3: Check if Hard Disk is properly connected

This problem is caused in 50% of cases by a faulty or loose hard disk connection; to ensure that this is not the case, check your PC for any form of connection fault.

Important: If your PC is under warranty, it is not suggested that you open the casing because this would void your warranty; instead, take your PC to a service center. Also, if you lack technical understanding, avoid tampering with the PC and seek the assistance of an expert technician who can assist you in checking for damaged or loose hard disk connections.

Reboot your PC after you’ve double-checked that the hard drive connection is secure, and you should be able toFix Reboot and Select Proper Boot Device Issue this time.

Method 4: Run startup/Automatic Repair

1.Restart your computer after inserting the Windows 10 bootable installation DVD.

2.When asked to, To boot from a CD or DVD, hit any key, then any key to continue.

3. Choose your language preferences, and choose Next. In the bottom-left, tap Repair your computer.

4. Click Troubleshoot on choose an option screen.

5. Click Advanced option on Troubleshoot screen.

6. Click Automatic Repair or Startup Repair on the Advanced options screen.

7. Wait for the Windows Automatic/Startup Repairs complete.

8. Reboot to see whether the Fix Reboot and Select Proper Boot Device issue has been resolved; if not, proceed.

Method 5: Enable UEFI Boot

1. Reboot your computer and press F2 or DEL, depending on your computer, to access Boot Setup.

2. Make the following adjustments:

Change Boot list option to UEFI
Disable Load Legacy option ROM
Enable Secure boot

3. After that, tap F10 to Save and Exit the boot setup.

Method 6: Change the Active Partition in Windows

1.Open cmd using the Windows installation CD once more.

2. Enter the following command into cmd and hit enter after each one:

Note: every time mark the System Reserved Partition (usually 100mb) active, and if you don’t have one, mark the C: Drive the active partition.

DiskPart
list disk
select disk 0
list partition
select partition 1
active
exit

3.Restart your computer after closing the command prompt. In many circumstances, this procedure proved successful in resolving the Fix Reboot and Select Proper Boot Device issue.

Method 7: Repair Install Windows 10

If none of the preceding solutions work, your HDD is probably good, but you’re getting the error “Reboot and Select proper Boot device Or Insert Boot Media in Selected Boot device and press a key.” Because the operating system or BCD information on the HDD was somehow wiped.

In this scenario, you can try to repair Windows, but if that doesn’t work, your only option is to install a fresh copy of Windows (Clean Install).

That’s all, you’ve successfully resolved the Reboot and Select Proper Boot Device issue. If you have any further questions, please leave them in the comments area.