MTK USB Driver Free Download Latest All Version for Windows 11/10

MTK USB Driver is a cutting-edge USB driver program that recognizes today’s MediaTek MTK-based smartphones and connects them to a computer for flashing, unlocking, and repairing with the SP Flash tool, Miracle Box, UMT, and MRT Box dongles, as well as any MTK Repair/Unlock Tool. If you wish to use VCOM/CDC/Preloader port to unlock MediaTek MTK powered smartphones like Oppo, Realme, Vivo, or Xiaomi Redmi, you must first download and install MTK USB Driver on your PC.

MTK driver primarily serves as a link between your computer and your phone, allowing you to connect your phone to your computer for flashing, updating, upgrading, and transferring personal files. It also assists in the free repair of soft bricking and data transferring issues.

MTK tool will not be able to recognize your phone unless you install an appropriate MTK USB driver on your PC and SP Flash Tool. Here, I’ll show you the best two installation methods: Direct & Manual. So, follow the full article carefully.

Note: All versions of Microsoft Windows 7, Windows 8, and Windows 10 are supported by these drivers (32 & 64bit).

It becomes simpler to flash stock firmware files or any other custom files utilizing ADB & Fastboot Tools like Nokia OST Tool, AFT Tool, Vivo ADB Tool, SP Flash Tool, MTK Unlock Tool, MTK FRP Tool, FRP Bypass Tool, Miracle Box, MCT Bypass Tool, MRT Tool, CM2 MTK Tool & UMT Mtk Tool when you install the MediaTek USB Driver on your computer.

Download MediaTek MTK USB Driver Latest [All Version]

I’ve included the best link for downloading the MediaTek USB VCOM/ Preloader. The drivers are fully functional and virus-free, and they may be installed using either the Installer or the manual approach.

  • Only for Android and feature phones with MTK processors.
  • ADB drivers must be installed on your PC.
  • A decent USB cord was required.

Turn off ‘Driver Signature Verification’ on your PC if you’re using Windows 8 or later. take the following steps:

1. Click on Start menu, type in “cmd” and right click on Command Prompt and select Run as Administrator.

2. In the Command Prompt (CMD) window, copy and paste the following code and press Enter.

bcdedit /set testsigning on

3. Then restart your PC to enter Test Mode.

4. Enter the following code to exit the Test mode:

bcdedit /set testsigning off

Download MTK USB Driver Windows 11/10/8/7 32 bit click here.

Download MTK USB Driver Windows 11/10/8/7 64 bit click here.

Download Manual MTK USB Driver click here.

How to Install MTK USB Driver on Windows 11/10/8/7

We’ll show you three different ways to install MTK Android USB Drivers on any Windows 32-bit or 64-bit computer. The first option we’ll show you is an automatic method that you may use by simply following the setup wizard’s instructions. This is the most secure method of installing Mediatek drivers on your computer.

Method 1 : Automatic Installation

1. Spreadturm drivers are available for download based on your PC’s operating system architecture (32-bit or 64-bit).

2. Then extract the downloaded file from the downloaded folder.

3. After that, enter the extracted folder and look for MTK_driver.exe, which you should double-click to start the setup.exe.

4. When the Installation Wizard Setup window appears, click the Next button.

5. Then click the I Accept the terms in the license agreement option to accept the Terms in the license agreement.

6. After accepting the terms and conditions, tap the Next button once again.

7. To install the Mediatek USB Driver drivers, click the “Install” button.

8. To finish the installation, wait a few seconds.

9. After you’ve completed the installation, click the Finish option to exit the InstallShield Wizard.

Check this video for more help:

This is the simplest method for installing the MTK Android USB Driver on your computer.

Method 2. Manually Install MTK Android USB Driver on Windows

If the first way fails, you can use the second method to manually install the MTK Android USB driver. Here’s how to do it step by step:

1. On your Windows PC, go to Control Panel > Device Manager.

2. Click on the Action =>> Add legacy hardware.

3. Then, a new popup will appear; from there, click the “Next” button.

4. Choose on the “Install the hardware that I have manually select from a list (Advanced)” and click on Next.

5. After that, select “Show All Devices” and click Next.

6. After that, a new window will appear; select Browse.

7. Select the downloaded driver files from the drop-down menu.

8. After you’ve made your selection, click the “OK” button.

9. Then you’ll return to the Add Hardware box and select the Next button.

10. Click the Next button once more and wait a few seconds.

11. That is all there is to it.

How to Update MediaTek USB Driver

1. On your Windows PC, go to the Control Panel > Device Manager.

2. If you look in the device management, you should see “SciU2S.”

3. Then pick “Search Automatically Updated Driver Software” from the right-click menu on “MediaTek USB Com.”

4. Then Windows will look for the appropriate USB driver for your device.

5. Wait for the conclusion.

6. When the driver installation is complete, your device will appear in the device manager as Mediatek USB Drivers.

I believe you all found the information useful. If you’re still having trouble with any of the processes or don’t understand something about this issue, please let us know in the comments box below. We’ll get back to you as soon as possible. If you have any questions, suggestions, or would like us to write about something, please contact us.

Loading Facebook Comments ...