How To Fix “Windows Automatic Repair Not Working”

Have you ever had a problem with Windows Automatic Repair? When Windows fails to load properly, how can you fix it and recover your data? In this post, I’ll teach you how to fix the problem with Windows Automatic Repair, as well as how to recover data fast and easily.

Quick Navigation :

  • Windows Automatic Repair Not Working
  • Part 1. FIX: Automatic Repair Windows Couldn’t Load Correctly in Windows 10/8
  • Part 2. FIX: Windows 10/8 Automatic Repair Couldn’t Repair Your PC
  • Windows 10 Startup Repair Not Working FAQ

Windows Automatic Repair Not Working

Automatic Repair is a recovery capability included in Windows systems such as Windows 8 and Windows 10. When the operating system fails to boot, the Windows Automatic Repair option tries to repair Windows. It does, however, have significant limits and, like any other program, does not always work.

According to customer input, there are two most prevalent causes for Windows Automatic Repair not working:

Windows was unable to load properly.

Your PC was unable to be repaired by Automatic Repair.

This post will now take you through each of the two faults one by one.

Part 1. FIX: Automatic Repair Windows Couldn’t Load Correctly in Windows 10/8

Have you ever had the problem with Windows Automatic Repair failing to work? Many users are discussing this mistake if we Google “Windows couldn’t load correctly” or visit professional communities like Windows forum and Windows seven forum.

This mistake can be caused by a variety of factors. Consider the following example:

  • The integrity of the File system may be compromised. (This happens considerably more frequently if a PC is turned off while it is writing critical data to the boot sector.)
  • The BCD (Boot Configuration Data) is either missing or corrupt. (This could be caused by disk write problems, power outages, boot sector viruses, or manual BCD configuration issues.)

What can be done to resolve this problem? If your Windows Automatic Repair fails to perform due to the error Windows couldn’t load correctly, try the following solutions.

Method 1: Using the System Restore Function, restore the PC to a normal system state.

When you notice the Windows couldn’t load correctly error, the easiest and most effective solution to fix Windows Automatic Repair not working is to click the Restore button.

Automatic Repair

Windows couldn’t load correctly

System Restore can attempt to return your computer to a previous state when it was working properly. This fix will not affect personal data, however, it may erase some recently installed apps. This is a process that cannot be reversed.

Then Windows begins to reboot and revert to a previous system state. Finally, there’s one thing left to do: recover deleted data files following a system restoration!

You could now be wondering:

How to recover moved files after system restore?

You can now test MiniTool Power Data Recovery to see if it can recover your lost data. By pressing the following button, you can save it to your computer.

Free Download

To begin, you must first run the app and log onto its interface.

Second, click the Scan button after selecting the destination drive you wish to recover, or go to the Devices tab and choose the entire disk to scan.

Alternatively, you can use the left panel’s Scan Settings button to define required file systems and file types before scanning.

Tip: You can terminate the scanning process by clicking the Stop button once you’ve located all of the data you need to retrieve. However, you need wait patiently until the scan is done to achieve the best recovery results, and the scanning time is governed by the data capacity.

Finally, preview the files, double-check that they are needed, and then save them to a safe location.

Note: You may receive the following notice while storing data: You have reached the file saving limit for the selected files, as shown below.
You can only scan your files on the computer with this trial edition. You must upgrade your copy of MiniTool Power Data Recovery to remove the restriction. To find out which license type is ideal for you, read this post “Compare License Type.”

Way 2: To fix hard disk and file system issues, use the Chkdsk command.

After utilizing the System Restore function, users are occasionally locked in an interminable startup repair loop. In that situation, they can troubleshoot the Windows couldn’t load correctly error by running chkdsk, as demonstrated in the steps below.

Step 1: Boot from the Windows bootable drive that was inserted into your computer.

Step 2: Select your preferred language and click Next.

Step 3: Select Repair your machine from the drop-down menu.

Step 4: Select Troubleshoot from the drop-down menu.

Step 5: Select Command Prompt from the drop-down menu.

Step 6: Type chkdsk /r and tap Enter.

Step 7: Type exit and press Enter.

Step 8: Restart your computer to see whether the error “Windows couldn’t load correctly” has gone away.

Method 3: Rebuild the Windows BCD with the Bootrec Command

You can try rebuilding Windows’ BCD if you’re still stuck in Automatic Repair with the Windows couldn’t load correctly problem after trying the above two methods.

Step 1: Insert the Windows bootable drive and boot from it.

Step 2: Go to Repair your computer > Troubleshoot > Advanced Options > Command Prompt.

Step 3: Type bootrec /fixmbr and click Enter.

Step 4: Type bootrec /fixboot and click Enter.

Step 5: Type bootrec /rebuildbcd and click Enter.

Step 6: Restart your PC and see if the Windows automatic repair not working issue persists.

Part 2. FIX: Windows 10/8 Automatic Repair Couldn’t Repair Your PC

Let’s begin with a real-life scenario from answers.microsoft.com:

Q: Automatic Repair was unable to repair your computer.
I’ve tried every boot option in the menu and still can’t get Windows 8 to boot. ‘Automatic Repair was unable to repair your computer.’ Later, with the Shutdown and Advanced options buttons, I go to the boot options page with “Log file: D:\Windows\System32\Logfiles\Srt\SrtTrail.txt.”
I don’t have any installation media because this was originally a Win7 machine that I upgraded to Windows 8.

 

If your Windows Automatic Repair fails to work as a result of the Automatic Repair couldn’t repair your PC error, you can attempt the following remedies to resolve the issue.

Way 1. Rebuild the BCD and repair the mbr

As we all know, Windows will not start if the MBR and Boot Configuration Data (BCD) are missing, corrupted, or incorrectly configured. As a result, if Windows Automatic Repair isn’t working, you can attempt fixing the MBR and rebuilding the BCD.

1) Insert the Windows bootable drive and boot from it.

2) Choose your language preferences, and click Next.

3) After selecting language, press Shift + F10 to open command prompt.

4) Type the following commands and tap Enter after each of them:

bootrec.exe /rebuildbcd
bootrec.exe /fixmbr
bootrec.exe /fixboot

Note: Some users indicate that if Windows Automatic Repair fails, you should perform an additional chkdsk command (chkdsk /f /r C: ).

5) After successfully finishing each command, type exit and press Enter.

6) Restart your computer to see whether the Windows Automatic Repair error has been resolved.

Way 2. Boot to Safe Mode and Run Command Prompt

A faulty driver, according to some users, could be the reason why Windows 10 Automatic Restore failed to repair your PC caused by an inattentive motorist They also attempt the following technique to fix the problem with Windows Automatic Repair not working.

1. Select Troubleshoot > Advanced Options > Startup Settings from the Troubleshoot menu.

2. Press the Restart button, and your computer should restart with a menu of options.

3. Select Enable Safe Mode with Networking from the drop-down menu.

4. When Safe Mode starts, get an updated version of the driver that is causing you problems.

5. Select Command Prompt (Admin) from the list by pressing Windows key + X.

6. Type DISM /Online /Cleanup-Image /RestoreHealth, and press Enter.

7. Turn off and on your computer.

8. Once you’ve installed the driver, the issue with Windows Automatic Repair failing to work should be rectified.

Way 3. Disable Early Launch Anti-Malware Protection

To fix the Windows 10 Automatic Repair couldn’t repair your PC issue, some users suggest removing early startup anti-malware protection.

Select Troubleshoot > Advanced Options > Startup Settings from the Troubleshoot menu. After that, the computer should restart and present you with a menu of choices. Disable early start anti-malware protection next. After that, restart your computer to see if the problem with Windows Automatic Repair has been repaired.

Way 4. Delete the Problematic File

Certain files, such as VMW, can cause Windows 10/8 Automatic Repair to fail to repair your computer. To check the log files, do the following.

Open Command Prompt. (Please see Way 1. Repair MBR and Rebuild the BCD to know how to open it.)

Type the following command in the prompt:

cd C:\Windows\System32\LogFiles\Srt
SrtTrail.txt

Boot critical file c:\windows\system32\drivers\tmel.sys is corrupt” you’ll see when you open the file.

To delete the problematic file, execute the following command in cmd.

cd c:\windows\system32\drivers
del vsock.sys

Note: Because the file can vary in different instances, you may need to travel to a different folder and remove a different file in your case. Before you remove a file, double-check that it isn’t a Windows 10 core file. You could also harm your computer’s running system.

Check to check if the problem has been resolved by restarting the computer. If not, move on to the next step.

Way 5. Disable Automatic Startup Repair

When you’re trapped in the loop of Windows 10 Automatic Repair failing to repair your computer, you may just need to disable it.

1. To run the command, open Command Prompt and input the following command, then click Enter:

bcdedit /set {default} recoveryenabled No

2. Type Exit and tap Enter.

3. Disable the Restart and Automatic Startup Repair options.

4. If you need to re-enable it, use the following command in cmd.

bcdedit /set {default} recoveryenabled Yes

5. To apply the modifications, restart your computer.

Way 6. Perform Refresh or Reset

If the Windows Automatic Repair loop persists, you may need to conduct a Reset or Refresh to resolve the Automatic Repair failed to repair your PC problem.

To execute a Refresh or Reset, follow these steps:

Choose Troubleshoot from the Windows Boot Options menu. Choose from two options: Refresh your PC or Rest your PC. To finish this process, follow the wizard’s instructions.

Your installed applications will be erased if you pick Refresh, but your installed universal apps and settings will be kept. Your data, files, and apps will be wiped if you select the Reset option. Before proceeding, it is essential that you recover all of your crucial files.

MiniTool Power Data Recovery is suggested in this case. This expert data recovery program can assist you in recovering data that has been lost. Furthermore, if none of the other options work, you can try using this tool to recover lost data because it includes MiniTool Power Data Recovery Bootable Edition, which allows you to recover data when PC won’t boot.

Note: MiniTool Bootable Media Builder is not available in this trial edition. To obtain it, it is recommended that you select the Personal or higher edition.

Let’s look at the specific steps now.

To make a bootable CD, DVD, or USB flash drive, open MiniTool Power Data Recovery on a regular computer and click the Bootable Media button in the top toolbar.

Connect the MiniTool Boot CD/DVD Disc to your PC that is experiencing a Windows Automatic Repair loop.

Start the machine and go to the BIOS menu.

Set the Bootable Disc as the first boot device and save the modifications by pressing F10.

MiniTool PE Loader’s primary interface has a MiniTool Power Data Recovery button, click it.

The primary interface of this professional data recovery program will now appear; choose the target drive and click the Scan button.

 

Examine all required files and save them in a secure location.

As a result, all of the work has been completed.

Bottom Line

You’ve probably learnt everything there is to know about how to fix Windows Automatic Repair when it fails.

If you have any further questions about the Windows Automatic Repair loop, please leave them in the comments area or email them to  support@minitool.com.

Windows 10 Startup Repair Not Working FAQ

How do you fix Windows 10 when it fails to boot?
  1. Repair MBR and Rebuild the BCD
  2. Boot to Safe Mode and Run Command Prompt
  3. Disable Early Launch Anti-Malware Protection
  4. Remove the Problematic File
  5. Disable Automatic Startup Repair
  6. Perform Refresh or Reset
How do I fix the windows automatic repair loop?
  1. Reboot PC.
  2. Restore Windows Registry.
  3. Remove the Problematic File.
  4. Disable Automatic Startup Repair.
  5. Run Bootrec Command to Rebuild Windows BCD
  6. Restore system and data recovery
Why does my computer keep saying preparing automatic repair?
When a computer is unable to boot properly, Automatic Repair can help. It can sometimes start and stop working, leaving users with a blank screen with the error message “Preparing Automatic Repair” or “Diagnosing your PC.” The most typical sufferers of this issue -Laptop Stuck on Preparing Automatic Repair during Startup – are HP, Lenovo, Asus, Dell, and Acer customers.
How do I get out of the automatic repair loop?
  1. Perform a hard reboot.
  2. Boot into safe mode.
  3. extend system reserved partition.
  4. Rebuild BCD.
  5. Disable Automatic Repair at Windows 10 boot.
  6. Reinstall Windows and recover lost data.

 
Loading Facebook Comments ...