How to Fix the “Windows Updates Stuck at 100” Issue on Windows 10

The identical problem has lately been reported by a large number of people: Windows updates stalled at 100. If you’re one of them, and you’re looking for a quick way to solve the problem, this post can assist.

Windows Updates Stuck at 100

Windows Update is an important component of the operating system that ensures that the system runs smoothly. Important updates for Windows 10 are downloaded and installed automatically from Microsoft Server, although update installations sometimes get stuck or freeze when processing updates on Startup.

The following message may appear: “Working on update 100% complete. Don’t turn off your PC. This will take a while.” and you’ll find yourself stuck on the Windows update screen. There are a variety of causes for the problem, however, the majority of the time it is due to software or driver problems.

Now, using the troubleshooting guide below, understand how to truly fix the “Windows update stuck at 100” issue.

How to Fix the “Windows Updates Stuck at 100” Issue

1. Remove any USB accessories.
2. Start the Windows Update Troubleshooter program.
3. SoftwareDistribution Folder should be renamed.
4. Execute a Clean Boot.
5. Remove the particular update from your computer.
6. In Safe Mode, run DISM.
7. Start the Automatic Repair process.
8. In WinRE, run System Restore.

It’s annoying to see the “Windows stuck on update” message, but you should know that your update isn’t stuck; you’ll just have to wait a while for it to finish. You can try the methods below if it’s still stopped at the interface.

Method 1: Remove Any USB Peripherals

If your Windows update is stopped at 100, the first thing you should do is disconnect any external devices attached to your computer, as well as any USB devices such as pen drives, mice, keyboards, portable hard disks, and so on.

After you’ve successfully removed all USB peripherals, try updating Windows again to see if the problem has been resolved.

Method 2: Run Windows Update Troubleshooter

If you’re still stuck on the screen, try starting your computer in Safe Mode first. To access WinRE to enter Safe Mode, you can utilize Windows 10 recovery bootable media, such as a DVD or USB bootable disk. The process is as follows:

Step 1: Turn on your computer and boot it up with your Windows installation CD/DVD or USB bootable disk.

Step 2: Boot up your computer and go into the BIOS.

Step 3: Select the DVD or USB flash drive as the primary boot device and start the Windows 10 computer from it.

Step 4: To successfully enter WinRE, click Repair your computer.

You can now continue into Safe Mode.

Step 1: Select the Troubleshoot option from the Choose an option screen. After that, select Advanced options.

Step 2: Select Startup Settings from the drop-down menu.

Step 3: Select Restart from the drop-down menu.

Step 4: You will then be presented with a number of startup options. To enter Safe Mode, press the F4 key.

Tip: Methods 2–6 should be tried in Safe Mode. In WinRE, try 7 to 8. (Windows Recovery Environment ).

Your computer will now restart in Safe Mode. The easiest and quickest way to fix the “Windows update stopped at 100” error is to run Windows Update Troubleshooter. The Windows Update Troubleshooter is a built-in tool for resolving fix Windows update errors.

You can now launch Windows Update Troubleshooter by following the steps outlined below:

Step 1: To open it, type Settings into the Search bar.

Step 2: In the left panel, click Update & Security, then Troubleshoot.

Step 3: In the right panel, under the Get up and running area, click Windows Update, and then Run the troubleshooter.

Step 4: It will begin to detect any existing issues, and all you have to do now is wait for the procedure to complete. Then, on the right, click Apply this Fix.

Step 5: To complete the repair, follow the on-screen instructions.

Check if the “working on updates 100 complete” issue still remains after restarting your computer. If this method fails to resolve the issue, try the following ones.

Method 3: Rename SoftwareDistribution Folder

Renaming the SoftwareDistribution folder is the next option for you. Here’s how you can do it:

Step 1: In the Search box, type Command Prompt, then right-click the top result and select Run as administrator.

Step 2: To stop Windows Update Services, execute the following commands and hit Enter after each one:

net stop wuauserv

net stop cryptSvc

net stop bits

net stop msiserver

Step 3: To rename SoftwareDistribution Folder, execute the following command and press Enter:

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

Step 4: To start Windows Update Services, execute the following commands and hit Enter after each one:

net start wuauserv

net start cryptSvc

net start bits

net start msiserver

Check to see whether the “working on updates 100” error has gone away after rebooting your computer.

Read also: How to Delete Software Distribution Folder on Windows 10

Method 4: Perform a Clean Boot

Clean Boot might help you start Windows with the bare minimum of drivers and startup programs, avoiding software conflicts while installing Windows updates. To do a clean boot, follow these steps:

Step 1: In the Run box (by clicking the Windows + R keys), type msconfig and press Enter.

Step 2: After that, select the Services tab. Select Hide All Microsoft Services from the drop-down menu.

Step 3: To save the adjustment, click the Disable all button and then Apply.

Step 4: Go to the Startup tab and select Open Task Manager from the drop-down menu.

Step 5: Click Disable on the first enabled application in the Task Manager page. You must now disable each of the enabled applications one by one. Close Task Manager and click OK after disabling all programs.

After that, restart the machine to update Windows once more. If the “working on updates 100 percent complete” issue does not appear when the computer is in a clean startup condition, it means that one of the apps is to blame.

Method 5: Uninstall the Particular Update Causing the Issue

If the error persists, you can try deleting the update that is causing the problem. The procedure is as follows:

Step 1: Open Control Panel in the first step. Select Programs and Features from the drop-down menu.

Step 2: Select View installed updates from the left-hand menu.

Step 3: Select Uninstall from the context menu of the specific update that is causing the issue.

The “Windows update stopped at 100” issue should be resolved after restarting your computer.

Method 6: Run DISM in Safe Mode

DISM, which allows you to repair faulty system files, is another option. Please refer to the steps below:

Step 1: In the Search box, type cmd, then right-click the first result and select Run as administrator from the menu.

Step 2: Type the commands below and hit Enter after each one:

Dism /Online /Cleanup-Image /CheckHealth

Dism /Online /Cleanup-Image /ScanHealth

Dism /Online /Cleanup-Image /RestoreHealth

Step 3: Wait for the DISM command to complete before continuing. If the commands above don’t work, try the ones below:

Dism /Image:C:\offline /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows

Dism /Online /Cleanup-Image /RestoreHealth /Source:c:\test\mount\windows /LimitAccess

Rebooting your computer should resolve the “Windows stuck on update” problem.

Method 7: Run Automatic Repair

If the difficulty with working on updates 100 percent persists, you must perform Automatic Repair. I’ll walk you through it step by step.

Step 1: To enter WinRE, click Repair your computer in the bottom-left corner.

Step 2: To proceed, you must click Troubleshoot in the popup window.

Step 3: To proceed to the next page, select Advanced options.

Step 4: In the Advanced options page, select Startup Repair and wait for the process to finish.

When the operation is complete, restart your computer and run Windows Update to see whether the issue with updates 100 has been resolved.

Tip: If Windows Automatic Repair is not working, see How To Fix “Windows Automatic Repair Not Working for instructions on how to resolve the problem.

Method 8: Perform System Restore in WinRE

If the preceding techniques fail, you should use WinRE to execute a System Restore. Here’s how you can do it:

This procedure can only be used if you have previously made a restore point.

Step 1: The first step is to launch WinRE.

Step 2: Select Troubleshoot from the Choose an option menu, then Advanced options.

Step 3: Select System Restore from the Advanced menu.

Check this video for more help:

Step 4: Complete the restore by following the on-screen directions.

Now try running Windows update to see if the problem has been resolved.

What to Do After Solving Windows Update Stuck at 100?

You should generate a system image to restore your system if it fails after you solve the problem of Windows update stopped at 100%.

When it comes to creating a system image, MiniTool ShadowMaker — a superb and professional backup software– is highly recommended. Backing up and restoring your system is simple and secure.

MiniTool ShadowMaker can back up files and folders, disks, and partitions in addition to backing up your operating system. What’s more, you can use it for free for the first 30 days, so download it and give it a shot.

Free Download

To make a system image with MiniTool ShadowMaker, follow these steps:

Step 1: Open MiniTool ShadowMaker and select Keep Trial from the menu.

Step 2: To access the main interface, click Connect under This Computer.

Step 3: By default, MiniTool ShadowMaker selects the source. As a result, all you have to do now is pick a backup location.

Step 4: Navigate to the Backup section of the website. To begin building a system image, click Back up Now.

Tip: If you choose Back up Later, you may then choose Back up Now on the Manage page to begin the backup process.

Step 5: Wait for MiniTool ShadowMaker to complete the backup process.

Final Words

To summarize, this article has explained what causes the Windows update stopped at 100 issue and provided eight ways for resolving it. Try these methods if you run into the same problem. If you know a better solution to the problem, please post it in the comments section.

It is advised that you build a system image after you have resolved this issue.

 

Windows Updates Stuck at 100 FAQ

How long should Windows update take?

On a computer, the update should take between 10 and 30 minutes. If you install Windows on a traditional hard disk, however, the procedure will take a long time. You have five days to schedule the installation, but you cannot postpone it indefinitely.

Can I stop a Windows update in progress?

1. In the Windows 10 Search box, type Control Panel and select the appropriate result.
2. From the menu options, choose Security and Maintenance.
3. Select Stop Maintenance from the Maintenance menu.

What happens if I shut down during the Windows update?

If you turn off your computer in the middle of an update installation, it will be severely damaged. If the computer shuts down due to a power outage, you must wait a while before restarting it to complete the update installation. It’s very likely that your PC will become bricked.

Can you fix a bricked computer?

Devices that have been bricked are unable to be powered on or function properly. Conventional methods for repairing bricked devices are ineffective. If Windows fails to run on your computer, for example, it is not “bricked,” as another operating system can be installed.