FIX: Windows 10 Settings won’t open / crashing

The Settings app is one of the most important Windows applications, and it allows you to customize your device, edit accounts, and more. It’s tough to do anything without access to it, therefore use DISM to quickly resolve the problem. Make sure you have the most recent Windows updates installed, as a new patch may be able to resolve the issue.

To fix various PC problems, we recommend Restoro PC Repair Tool:

This software will fix common computer faults, protect you from file loss, malware, and hardware failure, and optimize your PC to run at its best. In three simple actions, you can immediately fix PC problems and eradicate viruses:

  1. Download Restoro PC Repair Tool, which includes patent-pending technologies (patent available here).
  2. To detect Windows faults that may be causing PC difficulties, click Start Scan.
  3. To correct issues that are hurting your computer’s security and performance, click Repair All.

Because it controls the entire system, the Settings app is one of the most crucial Windows 10 features.

Basically, this program is where you go to adjust most of your OS’s functions. It can also cause major problems if it stops working.

This is exactly what happened if you’ve arrived here, however, we’ll try to assist you with a few options in this article.

Why can’t I access Settings in Windows 10?

There are a variety of reasons why you might not be able to use the Settings app in Windows 10. We’ve described a handful of the potential difficulties, based on their complexity.

➡ An OS update – This issue can appear after a Windows upgrade, even if everything was working perfectly previously. Roll back the update that created the problem.

➡ Corrupted app – When it arises out of nowhere and for no apparent reason, the issue is usually caused by the app becoming corrupted due to power failures, malware, or other circumstances, but the remedies below will help you cure it.

➡ Glitches and junk files – Too many trash files on your computer might not only create major damage over time, but they can also be the source of this issue. In this circumstance, you must clean the unnecessary files from your PC.

➡ System bugs – Third-party faulty software can sometimes influence the system, and a simple uninstall or reboot will restore things to normal.  Booting in Safe Mode is also a viable option because it prevents the loading of third-party software.

To enter Safe Mode, hold the Shift key down while pressing the Start button, then the Power option, and then Restart.

Are there any other possible issues with the Settings app?

Here are some additional instances of problems that can be solved using the same methods:

  • Windows 10 Settings app won’t open – The most prevalent problem with Windows 10’s Settings app is when you simply click the icon and nothing occurs.
  • Windows 10 Settings app missing – In certain circumstances, you won’t even be able to find the Settings app icon because it has vanished from the Start Menu.
  • Windows 10 Settings app crashes – Another typical issue is when you can open the Settings app but it crashes right away.
  • Windows 10 Settings grayed out – The least common (but still conceivable) circumstance is that the Settings app icon in the Start Menu is simply grayed out.

How To Fix Windows 10 Settings Not Opening/Working

1. Run the SFC/scannow command

1. To start Command Prompt with full privileges, click the Start button, type cmd, and select Run as administrator.

2. Press Enter after entering the following line:


3. Close Command Prompt and restart your computer after the process is completed. To do so, press and hold the Start button while selecting the Power button and selecting Restart.

This command will thoroughly examine your machine for problems and provide an appropriate solution (if available).

As a result, it will undoubtedly address the Settings app issue, and it may also address issues that you were unaware of.

If you’re having trouble with the SFC process, we have a guide that will show you what to do if the scannow command stops before finishing the process.

2. Use Powershell to reinstall preinstalled apps

1. Right click Start button, select Windows PowerShell (Admin) from the list.

2. To run this code, type or paste it and hit Enter:

powershell -ExecutionPolicy Unrestricted Add-AppxPackage -DisableDevelopmentMode -Register $Env:SystemRoot\ImmersiveControlPanel\AppxManifest.xml

3. This procedure may take some time, so be patient and wait until it is completed.

3. Run DISM

1. To launch Command Prompt with full access, click the Start button, type cmd, and choose Run as administrator.

2. Put in the following command and press Enter:

DISM.exe /Online /Cleanup-image /Restorehealth

3. Wait for the procedure to complete, then restart your computer by pressing the Start button, selecting the Power button, and selecting Restart.

Another built-in troubleshooting tool from Windows is Deployment Image Servicing and Management (DISM).

DISM, as the name implies, re-deploys the system image, renewing all system features along the way, including the Settings app. Before you finish the process, don’t forget to understand what to do if DISM fails.

4. Update Windows

1. Press the Start button and type update, choose Check for updates from the results then.

2. Now, select Check for Updates from the drop-down menu. The system will download and install any new updates that are available.

Windows Update is where Microsoft normally distributes patches and solutions for different system issues.

The technique above still takes you to the Settings app, so if you still can’t go into it, your only option is to manually install the updates.

Head to the Windows Update Catalog page, find the most recent update for your Windows 10 version, and then follow the on-screen instructions to download the update.

In this video, we are gonna show you how to fix Settings not opening in Windows 10:

5. Create a new user account

1. To start Command Prompt with full privileges, click the Start button, type cmd, and select Run as administrator.

2. To run, type or paste the following command and press Enter (replace username and password with your preferred user name and password):

net user /add username and password

3. Now give it administrator access by typing and pressing Enter (replace username with the name of the user you created earlier):

net localgroup administrators username /add

4. Now try to enter the Settings app again using the new user you just established.

You might not be able to enjoy all of Windows 10’s capabilities if your user account is broken or corrupted. If you’re using a user account that doesn’t have administrative rights, the same thing could happen.

As a result, double-check that your account has all of the required permissions to access the Settings page. If not, you can register a new account to see if the problem has been resolved.

We can also assist you in determining what to do if your user profile is corrupted.

How can I quickly open the Settings app?

It’s possible that simply launching the Settings app is the issue, therefore experimenting with alternative approaches may lead to success. As a result, we recommend that you look into a few other options:

1. Use the Start button

This is the most straightforward method. Simply pick Settings from the Start menu.

2. Use the Search function

Clicking the Start button, then typing settings and open the app from the results is a close runner-up alternative.

3. Right-click the Start button

You can also right-click the Start button and choose Settings from the drop-down menu.

4. Use the Settings shortcut

You may also use the Windows key + I keyboard shortcut to enter the Settings app. It’s incredibly quick and efficient.

Try to remember it because if your mouse isn’t responding or your screen is frozen, this may be your only option.

5. Use the Run app

1. To start the Run app, tap the Windows key + R.

2. Type ms-settings: (include the : character at the end. It’s not a mistake) and tap Enter or click OK.

6. Use Command Prompt

1. Choose the Start button, type cmd and choose Run as administrator.

2. Type start ms-settings: and tap Enter to launch it.

The Settings app can be accessed in a variety of ways. You can, for example, ask Cortana to open it, but the most important thing is to use it.

We hope our suggestions were helpful in resolving the Settings app problem in Windows 10 and that things are now back to normal.

If the problem started after a Windows update, make sure you installed any patches that Microsoft has released since then.

Even if you are still unable to access the Settings, a notification will appear in the system tray, and you may be able to access it from there.

Now that you’ve updated the Settings app in Windows 10, you might be looking for best Windows 10 optimizer software to fix system faults and speed up your PC.

If you have any further questions or recommendations, please leave them in the comments section below, and we’ll be sure to check into them.

Loading Facebook Comments ...