FIX: Windows 10 Network Cable Unplugged Error

The Internet has become one of the most crucial aspects of our digital lives in recent years. Consider how difficult it would be to use your computer without access to the internet. Many Windows 10 customers are reporting Network Cable Unplugged problems, which indicate that their machine is unable to correctly identify the Ethernet connection, resulting in errors.

Typically, the error notice appears on the desktop or notification screen. It’s also visible in the Ethernet network connection’s status. The problem isn’t caused by a bad Ethernet connection. Even if you’re connected to the internet via Wi-Fi, it can still appear and cause you to lose your connection. This issue is known to reappear every few hours or days once you’ve seen it on your computer.

There is no need to be concerned if you are experiencing the same issue. Using our approaches, we will assist you in resolving this issue. Simply follow the steps listed below one by one until the problem is solved.

How to Fix Network Cable Unplugged Error in Windows 10

The cause of this issue may differ depending on the computer’s configuration. Every computer has its own set of settings. Some PCs may experience this problem as a result of obsolete or broken drivers, while others may see the same error as a result of a conflict between the computer’s or an application’s connection speed.  Whatever the case may be with your computer, we will assist you in resolving the issue. To get rid of this error, follow the steps below.

This procedure should resolve the problem. If the issue persists, try the following solutions.

Table of Contents

Fix 1 –  Change Duplex Settings
Fix 2 – Reset Network
Fix 3 –  Disable Ethernet Connection and Perform a Hard Reboot
Fix 4 –  Uninstall Ethernet Adapter Drivers
Fix 5 –  Update Ethernet Adapter Drivers
Fix 6 – Check Hardware for Issues

Fix 1 –  Change Duplex Settings

Windows utilizes a complicated technology called Duplex to regulate network communication directions. The duplex configuration is automatically set to default for best performance, as determined by Windows. Many users have claimed that the Network Cable Unplugged error was caused by duplex settings, which they were able to fix by altering the settings. To do so, follow the steps below.

Step 1 – In the Windows 10 search bar, type View Network Connections. Select the search result.

Step 2 – Right-click on your Ethernet adapter and select properties from the context menu.

Step 3 – Choose Qos packet scheduler and then tap on configure

Step 4 – In the prompt that opens, select yes.

Step 5 – Go to the Advanced tab and look under Property for Speed & Duplex. To choose it, click on it.

Step 6 – Change the value to 100 Mbps Half Duplex. Click the OK button.

Step 7: Shut down and restart your computer.

Note: If this does not help. Just Change the value to 10 Mbps Full Duplex and Check again and see if it works.

Replace the Ethernet cable in your computer and see if the problem has been resolved. If the problem remains, try changing the values in Step 4 to see if it resolves the issue. If none of the settings appear to work, proceed to the next step.

Fix 2 – Reset Network

1. In Windows 10 search box, type cmd.

2. Right-click on the command prompt icon and then choose run as administrator.

3. Now, copy and paste the commands one at a time, to execute them, choose enter.

ipconfig / flushdns

4. Then, run the command listed below.

netsh winsock reset

5. Close the cmd window now.

Fix 3 –  Disable Ethernet Connection and Perform a Hard Reboot

If the following two techniques did not solve your problem, you should try a hard reboot after disconnecting the Ethernet cable. A hard reboot entails disconnecting the computer’s power supply cable and battery (for laptop users). This discharges all of your computer’s capacitors. You’ll also need to turn off the Ethernet connection before you do that. This is how you go about doing it.

Step 1: On the taskbar, look for the Wi-Fi or network adapter icon. Right-click on it and choose Open Network & Internet Settings.

Step 2: Navigate to Change adapter options in the Related Settings.

Step 3. Find your Ethernet connection and right-click on it. Choose Disable.

Step 4: Turn off your computer and disconnect the power cord. Remove the battery from your laptop as well. Unplug the Ethernet cable as well.

Step 5: Give yourself at least 15 minutes to wait.

Step 6: Turn on your computer and connect the wire and battery. The Ethernet wire should not be connected at this time.

Step 7. Right-click on Wi-Fi or network adapter icon and choose Open Network and Internet Settings.

Step 8. Navigate to Change adapter options in Related settings.

Step 9. Right-click on your Ethernet connection and hit Enable.

Step 10: Replace the Ethernet wire in its original location.

Check to see if this strategy was successful in resolving your issue. If the problem remains, move on to the next step.

Fix 4 –  Uninstall Ethernet Adapter Drivers

Faulty drivers could also be the cause of the issue. This could have occurred because Windows updates the drivers automatically through Windows Update, and it may have installed incorrect or damaged drivers. As a result, we’ll uninstall the Ethernet adapter’s drivers in this method so that it can revert to default drivers. To perform this procedure, follow the steps below.

Step 1. Right-click on the Start menu button and choose Device Manager.

Step 2: Expand Network Adapters and right-click on your Ethernet Adapter. Choose Uninstall device.

Step 3. When prompted for confirmation, check the box next to Delete the driver software for this device and then click Uninstall.

Step 4: Tap on Scan for hardware changes.

After you complete the last step, Windows will install the Ethernet Adapter’s default drivers. Check to see whether this has resolved your issue. If the problem persists, proceed to the next step.

Fix 5 –  Update Ethernet Adapter Drivers

If reinstalling the drivers didn’t work, your computer’s drivers were/are most likely obsolete. The problem should be resolved by updating the drivers. To perform this procedure, follow the steps below.

Step 1. Right-click on the Start menu button and choose Device Manager.

Step 2. Expand Network Adapters and right-click on your Ethernet Adapter. Choose Update Driver.

Step 3. Choose Search automatically for updated driver software.

Windows will now download and install the latest Ethernet Adapter drivers. When the process is finished, restart your computer, and the issue will be gone.

Fix 6 – Check Hardware for Issues

Before you begin troubleshooting procedures on your computer, double-check that the hardware is in working order. Check both ends of the Ethernet wire to ensure it isn’t broken. The Ethernet cable must be properly inserted into the router’s appropriate slot. If at all feasible, connect the Ethernet cable to a different computer. Check to see if the internet is accessible. If everything works correctly on the other computer, the problem is likely to originate from within your machine, which we will attempt to resolve using the methods listed below.

If you’ve any queries, check this video:

We hope we were able to assist you in resolving this issue. If you were able to resolve this mistake using a different approach, or if you have any further questions, please leave them in the comments section below.

 User submitted Solution:

1 – Right-click Start menu.

2 – Choose Device Manager.

3 – Expand Network Adapter.

4 – Right-click Ethernet Adapter and click Properties.

5 – Go to Advanced tab, click Speed & Duplex.

6 – Choose 100 Mbps Half Duplex. Click OK.

7 – Restart your PC.

Loading Facebook Comments ...