Fix: Ethernet Not Working in Windows 10

Fix Ethernet Not Working in Windows 10: If you can’t connect to the internet via an Ethernet cable, you’ll need to troubleshoot the problem. You’ll see that the PC doesn’t recognize the ethernet connection if you launch the Network and Sharing Center.

However, if you try to access the internet while connected to WiFi with the same connection, you will be able to do so, indicating that the problem could be caused by incorrect network settings, corrupt or outdated network drivers, a damaged or malfunctioning ethernet cable, or other hardware difficulties.

Users who prefer Ethernet over WiFi are experiencing a major setback as a result of this problem, as they are unable to connect to the Internet via Ethernet cable. Ethernet not working in Windows 10 is a regular problem for those who have updated or upgraded to Windows 10. Thankfully, there are numerous patches available that appear to resolve this issue. So, without losing any time, let’s check How to Fix Ethernet Not Working on Windows 10 using the troubleshooting guide listed below.

Fix Ethernet Not Working in Windows 10

Ensure to create a restore point just in case something goes wrong.

Before continuing, check sure you’ve completed the following basic steps to resolve the issue:

• If the particular port on the router is damaged, try connecting the ethernet wire to another port on the router.
• If the cable itself is damaged, try using a different cable.
• Unplug the cord and reconnect it again.
• To see if the problem is addressed, try connecting the ethernet to another PC. If the second PC’s ethernet works, your PC’s hardware may be damaged, and you’ll need to send it in for repair.

Method 1: Run Network Troubleshooter

1. To access Settings, press Windows Key + I, then select Update & Security.

2. Select Troubleshoot from the left-hand menu.

3. Click on Internet Connections under Troubleshoot, then Run the Troubleshooter.

4. To launch the troubleshooter, follow the on-screen instructions.

5. Reboot your computer to apply the modifications.

Method 2: Reset the Ethernet Adapter

1. To enter Settings, press Windows Key + I, then click the Network & Internet icon.

2. Select Status from the left-hand menu.

3. Now, go down to the bottom of the Status page and click the Network Reset link.

4. Click the “Reset now” button on the Network Reset screen.

5. Try connecting the Ethernet to the PC again to see if you can Fix Ethernet Not Working in Windows 10.

Method 3: Enable Ethernet Device and Update Drivers

1. To launch Device Manager, use Windows Key + R, then type devmgmt.msc and press Enter.

2. Right-click on your Ethernet device and select Enable after expanding Network adapters.

Note: If it’s already turned on, you may skip this step.

3. Right-click it again and choose Update Driver.

4. Select “Search automatically for updated driver software” and allow it to install any new drivers that are found.

5. Reboot your computer to save your modifications and Fix Ethernet Not Working in Windows 10 or not.

6. If not, go back to Device Manager and right-click on your Ethernet device, then pick Update Driver from the context menu.

7. Choose “Browse my computer for driver software.“

8. Choose “Let me pick from a list of available drivers on my computer.“

9. Choose the latest Realtek PCIe FE Family Controller driver and then Next.

10. Reboot your computer when the updated drivers have been installed.

Method 4: Enable Ethernet Connection

1. To launch Network Connections, use Windows Key + R, then type ncpa.cpl and press Enter.

2. Right-click the Ethernet connection and pick Enable from the context menu.

3. Now that the Ethernet connection is enabled, try to connect to the Ethernet network again.

Method 5: Temporarily Disable Antivirus or Firewall

1. From the system tray, right-click on the Antivirus Program icon and select Disable.

2. After that, choose the time period for which the Antivirus will remain disabled.

Note: Pick the shortest length of time possible, such as 15 or 30 minutes.

3. After that, try to access the Internet again to see if the issue has gone away.

4. In Windows Search, type control and then select Control Panel from the list of results.

5. After that, go to System and Security and then Windows Firewall.

6. Click Turn Windows Firewall on or off from the left window pane.

7. Restart your computer after selecting Turn off Windows Firewall. Try connecting to the internet again to see if you can Fix Ethernet Not Working in Windows 10.

If the preceding technique does not work, please be sure to repeat the procedures to reactivate your Firewall.

Method 6: Flush DNS and Reset TCP/IP

1. Right-click the Windows Button and choose “Command Prompt(Admin)” from the context menu.

2. Now type the commands below, pressing Enter after each one:

ipconfig /release
ipconfig /flushdns
ipconfig /renew

3. Open the Admin Command Prompt once more and type the commands below, pressing enter after each one:

ipconfig /flushdns
nbtstat –r
netsh int ip reset
netsh winsock reset
netsh winsock reset catalog
netsh int ipv4 reset reset.log

4. Reboot your computer to have the modifications take effect. Flushing DNS seems to Fix Ethernet Not Working in Windows 10.

Method 7: Change Power Management Settings for Ethernet

1. To launch Device Manager, use Windows Key + R, then type devmgmt.msc and press Enter.

2. Right-click on your Ethernet device and select Properties after expanding Network adapters.

3. In the Ethernet Properties window, go to the Power Management tab.

4. Uncheck the box that says “Allow the computer to turn off this device to save power“.

5. Click Apply and then OK.

6. Reboot your computer to have the modifications take effect.

Method 8: Use Google DNS

1. Click Network and Internet in the Control Panel.

2. After that, go to Network and Sharing Center and Change adapter settings.

3. Select your Wi-Fi, then right-click and choose Properties.

4. Click Properties after selecting Internet Protocol Version 4 (TCP/IPv4).

5. Tick the box that says “Use the following DNS server addresses” and type:

Preferred DNS server: 8.8.8.8
Alternate DNS server: 8.8.4.4

6. Close all programs and you should be able to Fix Ethernet Not Working in Windows 10.

That’s it, you’ve successfully Fix Ethernet Not Working in Windows 10; nevertheless, if you have any further questions, please leave them in the comments area.