How To Fix ERR_NETWORK_CHANGED in Google Chrome.
If you encounter the ERR_NETWORK_CHANGED problem in Google Chrome in Windows 10, it signifies that your internet connection or browser is blocking you from loading the page. The error message explicitly states that Chrome is unable to connect to the internet, resulting in the error. There are a variety of difficulties that might cause this error, thus there are a variety of solutions. You should try all of them because what works for one user may not work for another.
Unable to access the network
Your connection was interrupted
A network changed was detected
Check your internet connection
This issue now affects Google, Gmail, Facebook, YouTube, and a variety of other websites, which is why it is so aggravating. You won’t be able to use Chrome until the problem is resolved. So, without losing any more time, let’s explore how to fix ERR_NETWORK_CHANGED in Chrome using the troubleshooting guide below.
Note: Before continuing, make sure you delete any VPN software you may have installed on your computer.
- How To Fix ERR_NETWORK_CHANGED in Chrome
- Method 1: Restart your modem
- Method 2: Flush the DNS and Reset TCP/IP
- Method 3: Disable and Enable your NIC (Network Interface Card)
- Method 3: Clear browsing data in Chrome
- Method 4: Use Google DNS
- Method 5: Uncheck Proxy
- Method 7: Reinstall your network adapter drivers
- Method 8: Delete WLAN Profiles
How To Fix ERR_NETWORK_CHANGED in Chrome
Make a backup copy of your data in case something goes wrong.
Method 1: Restart your modem
Restarting your modem might sometimes resolve this issue since the network may have encountered some technical difficulties that can only be resolved by restarting your modem. If you still can’t solve the problem, move on to the next step.
Method 2: Flush the DNS and Reset TCP/IP
1. Go to the Command Prompt. This step can be completed by typing ‘cmd‘ into the search box and pressing Enter.
2. Now type the commands below, pressing Enter after each one:
3. Open the Admin Command Prompt once more and type the commands below, pressing enter after each one:
netsh int ip reset
netsh winsock reset
4. Restart your computer to apply the changes. The problem Ethernet does not have a proper IP configuration appears to be fixed by flushing DNS.
Method 3: Disable and Enable your NIC (Network Interface Card)
1. Tap Windows key + R, then type ncpa.cpl and click enter.
2. Now right tap on the NIC that is facing issue the issue.
3. After few minutes, choose Disable and again Enable it.
4. Wait for it successfully receives an IP address.
5. If the problem remains, use cmd to run the following commands:
6. Restart your computer and see if the error has been resolved.
Method 4: Clear browsing data in Chrome
1. Open your Chrome browser and tap Ctrl + H to open history.
2. From the left panel, tap Clear browsing data.
3. Under Obliterate the following items from, make sure “beginning of time” is chosen.
4. Also, make a note of the following:
- Browsing history
- Download history
- Cookies and other sire and plugin data
- Cached images and files
- Autofill form data
5. Finally, select Clear Browsing Data and wait for the process to complete.
6. Restart your computer after closing your browser. Open Chrome once more and check if you can fix ERR_NETWORK_CHANGED there; if not, move on to the next step.
Method 5: Use Google DNS
1. In the right end of the taskbar, Right-click on the network (LAN) icon, and tap on Open Network & Internet Settings.
2. Click on Change adapter options in the right pane in the settings app that appears.
3. Right-click on the network you’d like to configure, and tap on Properties.
4. In the list, tap on Internet Protocol Version 4 (IPv4) and then tap on Properties.
5. Choose ‘Use the following DNS server addresses‘ from the General tab and enter the following DNS addresses.
Preferred DNS Server: 22.214.171.124
Alternate DNS Server: 126.96.36.199
6. To save your changes, click OK at the bottom of the window.
7. Restart your PC and try if you can cure fix YouTube videos won’t load. ‘An error occurred, try again later’.
6. Close all windows and try again to fix ERR_ NETWORK_ CHANGED in Chrome.
Method 6: Uncheck Proxy
1. Tap Windows Key + R and after that, type inetcpl.cpl and choose enter to open Internet Properties.
2. Then, navigate to Connections tab and choose LAN settings.
3. Uncheck Use a Proxy Server for your LAN and ensure that “Automatically detect settings” are checked.
4. Reboot your PC after clicking OK and Apply.
Method 7: Reinstall your network adapter drivers
1. Tap Windows Key + R then type devmgmt.msc and choose Enter to open Device Manager.
2. Expand Network Adapters and look for the your network adapter name.
3. Note down the adapter name in case something goes wrong.
4. Uninstall your network adapter by right-clicking on it.
5. Select Yes/OK if prompted for confirmation.
6. Restart your computer and attempt connecting to your network again.
7. If you can’t connect to your network, it’s because the driver software wasn’t installed automatically.
8. Now you must go to your manufacturer’s website and download the driver.
9. Restart your computer after installing the driver.
You may fix the ERR_ NETWORK_ CHANGED problem in Chrome by reinstalling the network adapter.
Method 8: Delete WLAN Profiles
1. Launch the Command Prompt. This step can be completed by typing ‘cmd‘ into the search box and pressing Enter.
2. Now, in the cmd prompt, type the following command and press Enter: show profiles netsh wlan.
3. Then run the command below to delete all Wifi profiles.
netsh wlan delete profile name=”[PROFILE NAME]”
4. Repeat steps 1-3 for all Wifi profiles, then reconnect to your Wifi.
In this video, we are gonna show you how to repair Chrome Unable to access the network ERR_NETWORK_CHANGED in Windows 10.
That’s it, you’ve successfully Fix ERR NETWORK CHANGED in Chrome. If you have any further questions, please post them in the comments area.